NuGenTec Flodynamix Chemistry cleaners orings plastics polymers degreasers cutting fluids disk drive biobased
spacer Products div Divisions div Company Info div FAQs div Inquiry div Orders div News div FloDynamix
Clean-n-Clear USDA BioPreferred Product Green ChemistryBioKleanSolar Power

CLEAN-N-CLEAR: LEED Buildings

Safe Non-Toxic / Non-corrosive / Non-Regulated 

Applications: Building Cleaner Exterior and Interiors, safe on all glass surfaces.  Removes Acid Rain, Hard Water Stains, rust, oxides, dirt, grease, grime…etc.  Safe in Indoor Cleaning applications…hard surface cleaner.  Designed to remove stage 1(1) water spots from alkaline buildup, hard water, sprinklers, acid rain, calcium on glass.  Eliminates alkaline residues, exhaust particles, chemical and mineral deposits, water spots and the runoff from brick, concrete, mortar and even RUST.  Excellent for new building cleanups.

Type One water Stain spot remover cleaner Clean N Clear
Removes Type 1 Water Stains / Spots

 

Building cleaning glass cleaning

 

Green Building Cleaner: If you own or are cleaning a LEED ( Leadership in Energy and Environmental Design, Green Building Rating System™) building. Look no further Clean N Clear is here. There isn't a more effective "greener" product on the market than NuGenTec's Clean-N-Clear.

USES:

flodynamix Building cleaner exterior and Interior flodynamix POLISHED ALUMINUM CLEANER - EXCELLENT!
flodynamix General Purpose floor cleaner and degreaser flodynamix Rust remover
flodynamix Pressure washing flodynamix Engine Cleaning
flodynamix Concrete cleaning flodynamix water spot remover
flodynamix window cleaner flodynamix Removes Brake Dust

 

Usage:

  • General Window / Building Cleaning use at 1:50 (2% or 2oz per gallon) with water, rinse with water
  • Spot removal: 1:10 to full strength depending on the severity of the stains, rinse with water. For heavy stains use a hot pressure washer or scrub lightly with a sponge with a non-scratching surface.

Typical Usage Parameters

 

Clean-N-Clear

Description

Mild effective cleaner

Use concentration: Spray/Squeegee
Floor scrubbers
Rust Removal

1% (1:100)
1% (1:100)
50-100% (1:1 - 100%)

Operating temperatures

70 up to 210°F

Foaming Properties

Excellent

Floor Scrubbers

·

Concrete, brick, granite, Glass

·

Ferrous metals

·

Aluminum/brass/copper

·

Oil Splitting formula

YES

Hard Water Stability

Excellent

Safe on Plants

Yes

Color

Clear (No dye)

Odor

None

Physical Properties:

 

Clean-N-Clear

pH, concentrate

3.5

pH, @ 1% bv

4.5 to 5.0

Bulk density, #/gal

9.2

VOC (concentrate)

Zero

Flash point

None

Chelates

None

Water solubility

Complete

Biodegradable

Yes

Silicates / HF / HCl / Phosphates

No

SPECIAL NOTES: This product does not contain Hazardous Ingredients.  Many products on the market make these claim yet still contain Solvents and Harsh Acids like HCl (hydrochloric acid) HF (hydrofluoric acid).  This acids are extremely dangerous and should be avoided. 

Availability: 5-gallon and 55-gallon containers; 300-gallon tote-bins and bulk tankers.
Shipment:
Freight classification is “Cleaning Compound N.O.B.I.N. Non-Regulated Material”
Storage: Keep out of direct sunlight. Keep from freezing. Store between 40-120°F.
Disposal: Dispose of in accordance with local, state, and federal regulations. For assistance with disposal contact
NuGeneration Technologies at 888-99-NuGen or e-mail:
info@nugentec.com.

 
nugen footer
NuGeneration Technologies Corporate Headquarters: 100 Professional Center Drive, Suite 101, Rohnert Park, CA 94928
Toll Free 888-996-8436, Phone 707-820-4080, Toll Free Fax (877) 204-9106, Fax 707-820-4079

Our MSDS (material safety data sheets) and Technical Data Sheets Require Adobe Acrobat® Reader software available free from Adobe.
Copyright© NuGeneration Technologies, LLC 1997-2008. All rights reserved. NuGenTec® and BioKlean® are Registered trade-marks of NuGeneration Technologies, LLC